Detector de metale Mikron NRG 150

– Microprocessor control of discrimination and auto ground balance.
– VDI – Visual Discrimination Indication
– Automatic sound discrimination of metals during searching – high tone for non-ferrous metals and low tone for ferrous metals /lodestone/.
– Mode of work only for non-ferrous metals. The metal detector doesn’t react to ferrous metals. This mode allows to be worked faster and effective and is very suitable for dirty soils.
– Manual or automatic filter for eliminating earth influence.
– IRON DISC control – Adjustment discrimination of the iron.
– VCO regime for the exact localization of the found object.
– Automatic tuning to temperature changes.
– High stability of the electronic unit to electromagnetic disturbances. /transmission lines, radars, etc./
– Setting of sound.
– Visual indicator for battery status.
– Work frequency: 2,0 – 22kHz (depend on the coil).
– The metal detector is partly water protected and can be immersed into water till the box with electronics. When searching single coins it can shows their situation in the soil: horizontally and vertically.
– Supplying of NRG-150 is made with accumulator pack of 12V. This detector is offered with automatic charger for it. Charging is easy without taking apart the block off the detector. It is also possible to be plugged in outer re-charge set.
– Time of work once charged is about 25 hours, and if using outer re-charge set – 60 hours!
– Weight of the metal detector fixed up is 1,5 kg including batteries.
– Every set is supplied with a user’s manual.
– The metal detector an be purchased with one ore more search coils. 27cm. in the set. NRG-150 wrk with different search coils: 16cm. ; 27cm.; 20x28cm ; 25x35cm.; 36 cm. and 45cm. DD coils This detector automatically recognizes the search coil and starts operating at the exact resonant frequency of the particular coil.